One Shoulder Orange Chiffon High-Low Wedding Dress

Hi

1. Chiffon fabric- I like the color 128 in the color chart you sent. The part that is covering one side of the shoulder can be sheer. Infact it might look nice that way. What do you think.? But the part thats below the waist need to be not sheer so I people cant see thru my legs. Can you place a lining for the bottom half of the dress (below waist) to avoid making it transparent? what are your thoughts on that.

2. The corset- is it going to be separate or attached to the dress? I dont know what its like in the original dress. I like your idea of- add boning underneath to make the bodice with corset design, so that it could slim your waist. I like the padded cups, boning and lining and zip closure (zip on side , not on back). Here is the fabric I liked from your website- lunss.com. I sent a link. Its F4028. I will choose gold color

What do you think about this one in gold for fabric- lunss.com

I think we can use sequin and put a boning inside which will keep it stiff and upright. what do you think?

The part that you marked in the picture with yellow outline, thats the part that needs to be stiff upright like a corset. I have sent you total 9 pictures to show how the pack of the dress need to look like . That also needs to be stiff and upright like a corset. Did you see pictures of the back of dress?

3. How do I pay and how much do I pay inorder to proceed with this dress. I need it delivered by June 15

HI I added this to my cart and am trying to pay, in order to rush the service but even though its in my cart, I am getting and error message saying that there is nothing in my cart. I would like to pay and get started with the order right away. Also I have some suggestions about how the bottom of the dress looks. I would like the front bottom of the dress to be cut higher, meaning upto my shin level and back side bottom end of dress to be lower. So it looks asymmetric cut. i will send a picture to show you what I mean

This is to show you the fabric. I want gold for the corset, with boning and padding to make it stiff. I dont want to wear a bra inside

I am interested in the sketching service but I also dont want that to delay the process of receiving the dress due to waiting for sketch.

I am also interested in the swatch but again dont want to delay the dress timeline of june15

Also in the yellow outline that you made in the picture to show the corset, I think that the pointed part needs to be on both sides. Not just one. I think in the picture we are able to only see one side as the other is covered with that orange chiffon.

I can buy the belt on my own, no problem

This picture is from your website- do you have a belt like this?

Hi

Are you getting my messages?

Can we please confirm this order

Hi

1. color- I like the coral color . The color 128 you show, is it coral?. How and when do i get to view the swatch?

2. Am i going to receive the dress by june 15?

3. The corset- In you opinion, what will look good for this style? the gold sequin? or a light gold satin like this?

I can sen you measurements tomorrow.

I would like you to make the dress according to the exact measurements I send you .

But I may have gained some weight by the time I wear this dress. Is there a way for you to make it so that there is some extra fabric on the inside of dress? So if I open up the one outer layer of stitches, it can accommodate my larger size in case I gain some weight?

14, 37, 74- these three look like gold color to me. Is there a way you can send me their picture side by side so I can choose properly. I dont know how to do that myself.

I will then choose one of the gold and place next to the 128/26 and finazlie the colors.

But fabric- satin and chiffon is good.

• Back shoulder width- 16.5 inch
• Bust (fullest portion)- 34.3 inch
• Under Bust- 29.8 inch
• Mid Shoulder to Bust Point- (with bra 9.4 inch) (without bra 9.8 inch)
• Waist (smallest portion of your waist) 28 inch
• Hips (fullest portion of your butt) 40 inch
• Height (barefoot) -63.2 inch
• Hollow to floor( measure with barefoot)- 50.5 inch
• Hollow to front hemline- 31 inch
• Hollow to back hemline( measure with shoes on)- 53.5 (with 3.5 inch shoes on)
• Shoe Height- 3.5 inch
• Armscye- 15.5 inch
• Belly(circumference of the middle area of Waist and Hip, it is a must-have measurement for the pregnancy and tummy fat)- 33.5 inch

How do I pay the rest, I tried but dont know how to.

Is 14 37 and 74 all shades of gold?

I will do 37 and 128

Thanks

Or do you think the champagne will look good with the 128

Okay

Let's do 74 champagne and 128 salmon color then

Please leave another 1-1.5 inch of material inside . So incase i gain weight I can still alter and wear the dress.

The part that's covering the shoulder , can it be made more narrow. So it doesn't go beyond my shoulder. I don't want it to look like a sleeve

Hi

I don't know what exactly how many centimeters you need to narrow it down . But you can you my shoulder measurements I sent you to make that decision. I just don't want it to go beyond my shoulder. I want it to look sleeveless, not with sleeve.

Also what's the color of the lining that's placed inside the bottom of the dress.

Thanks

Also the pointed part in the corset, can it be more stiff like shown in the original design?

the one you made looks soft and not very pointed, does not look stiff.

Ok. It looks good

Just please fix the shoulder area so it looks sleeveless.

And it will be all done

Should I click approve on your pictures?

Looks good.

Please include the belt and please ship it.

Hi I got the dress

I have question.

It makes me look fat in waist area . Where the lower half of dress starts

I think is because of the double layer in lining in the bottom part. I was expecting only single layer lining eg, just the satin champagne material and not the other layer that is attached with it. but the double makes it very thick

Is there a way for you to make it thinner in that waist area . I am sending pics

The problem is, when I put the belt on,it doesn't stay on the stich line. It is either sliding above or below the stich line.

By stich line, I mean the line that connects top and bottom half of dress.. so it looks very bad when I put on the belt. If the belt had a little hook or something that will hold it in place then it might look better.

Also the other problem I think is that the amount of pleats in the chiffon material gives it bulk in waist area . What if we remove the pleats and make it flat , I think it might be better.

I do like how you made the corset. It looks lovely.

if I send dress back , who pays for shipping?

Do you charge for alteration?

Thanks

Hi

I need to remove the pleats in dress. I can pay to send you the dress and can you please pay to send it back to me?

I already spent a lot of money on this dress so cant spend much more.

I wold like to remove all the pleats and make it just flat without pleats. Also I believe you can use same fabric after removing pleats.

Also the shoulder part is quite loose and keeps falling down. Maybe you can make it a bit tighter?

Let me know.

Thanks

hi

I am happy to share pictures once dress is altered. I can also share pictures of my dress you made last year that i really liked.

What would be the cost of new fabric , total cost . I will pay for shipping from here to you and if you can please pay for shipping back to me, it will be helpful.

The shoulder, can you make i t tighter by 1 inch. ?

the design of lower half of dress will remain same except that you will remove all pleats. do you think we should keep both satin and lining inside lower half of dress? to give it a firm look , i also don't want it to be so loose that it sticks to my legs and shows all curves of my legs.

What do you think, should we make a new belt? or just alter dress and no belt? because old belt doesnt work.

Thanks

the skirt design without pleats remain same. short from front and longer in back

Thanks.

I like the belt that you provided with the dress but it slides up and down because there's no hook to keep it in place.

Is it possible for you to just place very thin little loops on both sides of dress at waist , made of thin thread that the belt can go thru , in order to keep in place?

Let's remove the pleats and the lining. Will keep the satin in place underneath the chiffon for bottom half of dress.

It will still have the stiff appearance correct? And not so thin to stick to my legs. Right?

Thanks.

Hi.

I don't see where and how to pay.. please advise.

Also , I think we agreed that I will pay to send it to you and you will pay to send it to me. Is that correct?

And in your address, it says "sates" what does that mean . JiangSu is that a state?

HI

Just want to show you what I am imagining the dress needs to look like after alteration. A sleek look in the waist area

just to show you the look, but not too large/bulky in the bottom

Thanks

Hi

So also wanted to confirm you can do this.

The inner satin and the lining are very large and that's also causing the lower half of dress to look big. Can you please make it narrow. I am sending you pictures to show you..

This is original and looks wide/larger

This is when I make it narrow by holding it on the back. If you make it narrow like this it will help dress look sleek and narrow at bottom

Another picture to show you how wide the lower half of original dress is.

I hope you re able to understand what I mean.

So to summarize we are doing.

1. Shoulder part to be short by 1 inch

2. Small loops on side for belt

3 remove pleats

4. Narrowing lower half of dress by removing excess satin material .(currently it's too wide).

Yes, If I understand you correctly.

Sheath style means close to the body (but definitely not bodycon). I dont want it to be too tight either.

Yes A-line with chiffon overlay . The chiffon will also be same size shape as the satin (like sheath), it just lays on top of the satin.

Heres an example to show you what I am imagining the bottom to look like. Narrow like sheath but not tight fitting.

Hi. I made this sketch to show you the difference. Thanks for your help.

Hi

Can you please send me the exact mailing address again. I went to FedEx to ship but they couldn't find that zipcode. There was an error message.

Can I use UPS to mail you instead of FedEx?

Thanks.

Hi

I went to USPS. They said due to covid it may take 2 weeks or upto 2 months. Is that still okay? What is your experience with USPS. (It's different from UPS)

Is there any other option you know of?

Also UPS and FedEx shipping is very expensive right now. Charging 75-100$.

Thanks.

UH024923910US

This is the tracking number for USPS.

Expected delivery in 2wks.

Hi

Did you get my dress

Hi tansy

Thanks

Just to clarify,the skirt to be narrow as shown in here below in my sketch (shows old design and new design)

Tansy

Please review our last conversation from 6/22:

Sheath style means close to the body (but definitely not bodycon). I dont want it to be too tight either.

Yes A-line with chiffon overlay . The chiffon will also be same size shape as the satin (like sheath), it just lays on top of the satin.

Heres an example to show you what I am imagining the bottom to look like. Narrow like sheath but not tight fitting.

Hi.

It looks good.

There is books on the side for belt right ?

You can ship it.

Thank you again.